Domisan®
Roof

The Domisan roof as a canopy has proven itself for the economical renovation of buildings with corrugated sheet roofs.

  • old roof takes over the function
    of the sub-roof
  • No complex disposal
  • Assembly-friendly installation
  • suitable for profiles P5 and P6
  • Distance construction
    with support profile
  • cover with Domitec®-
    or GBS® profiles

Taking responsibility and conserving resources.
Sustainability as a matter of course.

The Domisan roof is the best choice for the economical renovation of corrugated sheet roofs and is suitable for profiles P5 and P6. The existing old roof is used as a sub-roof, which saves the time-consuming disposal. Due to the low weight of the Domisan roof, no further static measures are usually necessary. The distance construction is carried out with the support profile, which transfers the load directly into the existing substructure, without placing an additional load on the old roof. GBS® or Domitec roof profiles are used for the covering shell. The structure of the Domisan roof is also ideally suited for installing thermal insulation, which – depending on the thickness selected – meets the requirements of full insulation. For asbestos cement corrugated sheets, national guidelines must be observed.

Domisan®– roof

50my Resista Coating
anti condensate coating
for a roof pitch of 1.5 degrees or more
No cross joints, unjoined track lengths up to 40 m
Non-combustible profile
Penetration-free fastening
Ridge raising and eaves edging
Technische Daten & Lieferprogramm

Zubehör und sichere Montage

DOMICO Single anchor point

Tested according to DIN EN 795:1996, class A as anchorage device for max. 4 persons

DOMICO rope protection system

Tested according to DIN EN 795:1996, Class C as anchorage device for max. 4 persons

DOMICO Snow catcher and eaves snow catcher

Angles and snow stoppers are manufactured from a single component. The eaves snow guard offers additional safety against the slipping of ice plates.

DOMICO cable holder for lightning protection

Round wires guided on the roof surface can be attached to GBS® and Domitec® top shells with cable holders adapted to the roof profile.

DOMICO PV and solar terminals

For safe and system-compliant installation of the substructure of PV and solar systems. With stainless steel mounting bracket. Lengths of 150 mm, 250 mm and 450 mm, depending on static requirements.

PV mounting system

PV mounting system colour-matched to the cover shell, which can be mounted lengthwise, crosswise or diagonally. Integrated wind shields reduce wind pressure. Optionally with tested single attachment point for one person.

DOMICO step

Tested according to DIN EN 516

DOMICO catwalk

Tested in accordance with DIN EN 516. A railing with chest, middle and foot guard can be optionally installed.

Wir empfehlen nachdrücklich DOMICO-Originalprodukte zu verwenden, für die es geprüfte Daten und eine bauaufsichtliche Zulassung gibt.
Bitte beachten Sie, dass bei Verwendung von Fremdprodukt-Klemmen die Gewährleistungsansprüche aufgrund von unsachgemäßer Einwirkung auf die DOMICO-Dachprofile erlöschen können.

Outstanding architecture with DOMICO

Recommendation is everything. Here you can find out why architects, builders and specialist companies have chosen DOMICO.

Creative building with metal

Browse our project gallery.

No post was found with your current grid settings. You should verify if you have posts inside the current selected post type(s) and if the meta key filter is not too much restrictive.

Personal advice for your project

Our technical consultants are looking forward to your inquiry! Because our products are tailor-made for your building project. This guarantees maximum design freedom and economy.

Request consultation
Newsletter
EN